Skip to content
circuia
Editor

The country sets the standard for new projects and the currency.

Free tool · No sign-up

Voltage drop calculator (mm² and AWG)

Choose the conductor size, the length and the current: the calculator gives the voltage drop in volts and percent and compares it with the limits of your country (3 % lighting / 5 % other in the UK, 3 % per branch circuit in the US).

Updated on BS 7671 · NEC

Inputs

Rules applied: BS 7671:2018+A4:2026 — United Kingdom (beta, IET Wiring Regulations 18th Edition) · beta rules, to be checked locally

m

One way.

A
Supply

Result

Voltage drop

3.2%

That is

7.4V

Lighting (≤ 3 %)Too high
Other uses (≤ 5 %)Within limit
Voltage at the end of the line≈ 223 V

Indicative calculation (copper, service resistivity). Limits for installations supplied from the public low-voltage network.

References

  • § BS 7671 Appendix 4, 6.4

Estimate for planning only. Switch off before any work and have it checked by a qualified electrician.

Next step · free

Turn this result into a real plan

Draw your rooms, place sockets and lights: Circuia checks every rule as you go and builds the board schedule.

Open the free editor →Free · no sign-up to start
</> Embed this tool on your website

Free, no sign-up. Paste this code into your page (blog, contractor site, forum): the tool shows up and stays up to date.

How it works

  • ΔU = b × (ρ × L / S × cos φ + λ × L × sin φ) × I with ρ = 0.023 Ω·mm²/m (copper in service) and λ = 0.08 mΩ/m.
  • b = 2 for single-phase and 120/240 V two-wire circuits, 1 for balanced three-phase (drop per phase).
  • Limits: BS 7671 Appendix 4 §6.4; NEC 210.19(A) Informational Note 4; HD 60364-5-52 Annex G elsewhere.

Frequently asked questions

What is the maximum voltage drop allowed?

UK: 3 % for lighting and 5 % for other uses from the origin of a public supply (BS 7671 Appendix 4). US: 3 % on a branch circuit and 5 % feeder + branch are recommendations of the NEC informational notes.

How do I reduce voltage drop?

Use a larger conductor, shorten the run, or split the load. Doubling the size roughly halves the drop.

Why is my result different from an online table?

Tables assume a temperature, a power factor and sometimes a different resistivity. This calculator uses copper in service conditions and lets you set cos φ.

Design aid

For your actual home, move to the editor

Draw your home or describe it to the AI: Circuia places the points, checks the rules in real time and generates the consumer unit, single-line diagram and bill of materials.

Open the free editor

Other free tools