Free tool · No sign-up
How many sockets per room? Minimums by country
Choose the room types and their sizes: the calculator applies the same room rules as the Circuia editor for your country (BS 7671 guidance and building regulations in the UK, NEC 210.52 spacing in the US, the national norm elsewhere) and shows the minimum sockets, lighting points and data outlets.
Updated on BS 7671 · NEC
Result
Sockets
0
Lights
0
RJ45
0
| Room | Sockets | Lights | RJ45 |
|---|---|---|---|
| Living room 28 m² | 0 | 0 | 0 |
| Kitchen 10 m² | 0 | 0 | 0 |
| Bedroom 12 m² | 0 | 0 | 0 |
| Bedroom 10 m² | 0 | 0 | 0 |
| Bathroom 6 m² | 0 | 0 | 0 |
| WC 1.5 m² | 0 | 0 | 0 |
| Entrance hall 5 m² | 0 | 0 | 0 |
About 1 ring or radial socket circuit(s), each serving at most 100 m² of floor.
Minimums of the Circuia rules engine (BS 7671:2018+A4:2026 — United Kingdom (beta, IET Wiring Regulations 18th Edition)). Dedicated appliance outlets are not counted.
Estimate for planning only. Switch off before any work and have it checked by a qualified electrician.
Next step · free
Turn this result into a real plan
Open the editor with the Kitchen already drawn and its sockets placed: then wire it in one click.
</> Embed this tool on your website
Free, no sign-up. Paste this code into your page (blog, contractor site, forum): the tool shows up and stays up to date.
How it works
- Each room is checked by the editor's rules engine for the selected country, as a real plan would be.
- UK: socket recommendations of the IET On-Site Guide / building standards; ring final circuits up to 100 m² each (BS 7671 Appendix 15).
- US: receptacles every 12 ft of wall (6 ft rule, NEC 210.52(A)) and countertop rules (210.52(C)).
- Dedicated appliance outlets (washer, oven…) are not counted.
Frequently asked questions
How many double sockets should a bedroom have in the UK?
How far apart should receptacles be in the US?
Are appliance sockets counted?
Design aid
For your actual home, move to the editor
Draw your home or describe it to the AI: Circuia places the points, checks the rules in real time and generates the consumer unit, single-line diagram and bill of materials.
Other free tools
- Free toolCable size calculatorPower, length, use → cable size and breaker (mm² or AWG).
- Free toolConsumer unit plannerYour home → RCDs, breakers, rows of the panel.
- Free toolSupply capacity calculatorYour appliances → subscription, main fuse or service size.
- Free toolVoltage drop calculatorSize, length, current → % drop, within the limit or not.
- Free toolSingle-line diagram generatorYour home → printable single-line diagram of the panel.
- Free toolBreaker & cable per applianceOven, hob, EV, heat pump… → breaker, cable, RCD type.