Free tool · No sign-up
Consumer unit / panel planner
Describe the home (area, bedrooms, appliances): the editor's own auto-wiring builds the circuits, spreads them over RCDs (or RCBOs) for your country and sizes the consumer unit with its spare ways.
Updated on BS 7671 · NEC
Result
Rows
1
RCDs
6
Circuits
6
RCD 40 A 30 mA type A1/1
- Cooker32 A · 6 mm²
RCD 40 A 30 mA type A1/1
- Water heater16 A · 2.5 mm²
RCD 40 A 30 mA type A1/1
- Lighting – living room, kitchen, bathroom +16 A · 1.5 mm²
RCD 40 A 30 mA type A1/1
- Lighting – hall, bedrooms6 A · 1.5 mm²
RCD 40 A 30 mA type A1/1
- Sockets – kitchen, bathroom32 A · 2.5 mm²
RCD 40 A 30 mA type A1/1
- Ventilation6 A · 1.5 mm²
Split computed by the Circuia wiring engine on a typical home (rows of 18 modules). Estimate to be checked by an electrician.
See the single-line diagram of this panel →Estimate for planning only. Switch off before any work and have it checked by a qualified electrician.
Next step · free
Turn this result into a real plan
Draw your rooms, place sockets and lights: Circuia checks every rule as you go and builds the board schedule.
</> Embed this tool on your website
Free, no sign-up. Paste this code into your page (blog, contractor site, forum): the tool shows up and stays up to date.
How it works
- A typical home is drawn with the minimum equipment of each room, then auto-wired as in the editor.
- Circuits are spread over 30 mA RCDs with the country's limit per RCD, or one RCBO per circuit (UK, IE, CH).
- Rows are counted with the country's module width and a spare-capacity margin.
- US: branch circuits with GFCI / AFCI breakers where NEC 210.8 / 210.12 require them.
Frequently asked questions
How many RCDs does a house need?
RCBO or RCD board?
How many spare ways should I keep?
Design aid
For your actual home, move to the editor
Draw your home or describe it to the AI: Circuia places the points, checks the rules in real time and generates the consumer unit, single-line diagram and bill of materials.
Other free tools
- Free toolCable size calculatorPower, length, use → cable size and breaker (mm² or AWG).
- Free toolSockets per roomRoom type + area → minimum sockets, lights, data points.
- Free toolSupply capacity calculatorYour appliances → subscription, main fuse or service size.
- Free toolVoltage drop calculatorSize, length, current → % drop, within the limit or not.
- Free toolSingle-line diagram generatorYour home → printable single-line diagram of the panel.
- Free toolBreaker & cable per applianceOven, hob, EV, heat pump… → breaker, cable, RCD type.