Free tool · No sign-up
EV charger sizing: breaker, cable, RCD and supply check
Choose the charger power and your supply: the calculator sizes the dedicated circuit (breaker, cable, RCD type) and checks that your main fuse, subscription or service can take it next to the rest of the house — or that you need load management.
Updated on BS 7671 · NEC
Result
Breaker
32A
Cable
6mm²
Your 100 A supply can take it (19 kW available).
- PME supply: open-PEN fault protection or an earth electrode (BS 7671 722.411.4.1).
- New home chargers must be smart (Electric Vehicles (Smart Charge Points) Regulations 2021); notify the DNO.
Charging cost and payback of this charger
Estimate for a copper circuit. The charger's manual and the network operator's rules win; installation by a qualified installer.
References
- § BS 7671 Section 722 (722.311, 722.531.3.101)
- § BS 7671 722.411.4.1 (PEN fault / O-PEN)
- § Electric Vehicles (Smart Charge Points) Regulations 2021
Estimate for planning only. Switch off before any work and have it checked by a qualified electrician.
Next step · free
Turn this result into a real plan
Open the editor with the EV charger placed on its own circuit and RCD, then add the rest of the home.
</> Embed this tool on your website
Free, no sign-up. Paste this code into your page (blog, contractor site, forum): the tool shows up and stays up to date.
How it works
- Dedicated circuit for the charging point (BS 7671 722.311; NEC 625.40).
- US: breaker and conductors at 125 % of the EVSE current (625.41) — 40 A charging needs a 50 A circuit.
- RCD: type B, or type A + 6 mA DC detection (IEC 62955) — often built into the charger.
- Supply check: supply capacity − house peak load ≥ charger power, else load management or an upgrade.
Frequently asked questions
What size breaker for a 7 kW charger?
What breaker for a 48 A EV charger in the US?
Do I need to upgrade my main fuse?
Design aid
For your actual home, move to the editor
Draw your home or describe it to the AI: Circuia places the points, checks the rules in real time and generates the consumer unit, single-line diagram and bill of materials.
Other free tools
- Free toolCable size calculatorPower, length, use → cable size and breaker (mm² or AWG).
- Free toolSockets per roomRoom type + area → minimum sockets, lights, data points.
- Free toolConsumer unit plannerYour home → RCDs, breakers, rows of the panel.
- Free toolSupply capacity calculatorYour appliances → subscription, main fuse or service size.
- Free toolVoltage drop calculatorSize, length, current → % drop, within the limit or not.
- Free toolSingle-line diagram generatorYour home → printable single-line diagram of the panel.