Skip to content
circuia
Editor

The country sets the standard for new projects and the currency.

Free tool · No sign-up

Electrical wire colour codes by country (UK, US, Europe)

Pick a country: the reference shows the current conductor colours (line, neutral, protective earth, three-phase) and the old colours still found in existing installations — UK red/black before 2004, US NEC colours, harmonised European colours.

Updated on BS 7671 · NEC

Inputs

Rules applied: BS 7671:2018+A4:2026 — United Kingdom (beta, IET Wiring Regulations 18th Edition) · beta rules, to be checked locally

The colour tells you the role of a conductor — in principle. Line = live, N = neutral, PE = protective earth.

  • L — line (live, dangerous)
  • N — neutral (can also be dangerous)
  • PE — protective earth / ground

Never trust colours alone: switch off, lock off and test with a voltage tester before touching a wire.

Result

Current colours · ≥ 2004 (mandatory 2006)BS 7671 Table 51

  • L Line (single-phase)brown
  • L1 Line 1brown
  • L2 Line 2black
  • L3 Line 3grey
  • N Neutralblue
  • PE Protective earth / groundgreen-yellow

Old colours · < 2004 (until 31/03/2006)BS 7671:2001 (pre-amendment 2)

  • L Line (single-phase)red
  • L1 Line 1red
  • L2 Line 2yellow
  • L3 Line 3blue
  • N Neutralblack
  • PE Protective earth / groundgreen-yellowgreen

Old colours vary by period and installer. Always test before touching anything.

Estimate for planning only. Switch off before any work and have it checked by a qualified electrician.

Next step · free

Turn this result into a real plan

Draw your rooms, place sockets and lights: Circuia checks every rule as you go and builds the board schedule.

Open the free editor →Free · no sign-up to start
</> Embed this tool on your website

Free, no sign-up. Paste this code into your page (blog, contractor site, forum): the tool shows up and stays up to date.

How it works

  • Europe and the UK: harmonised colours of IEC 60445 / HD 308 S2 — brown (L1), black (L2), grey (L3), blue (N), green-yellow (PE).
  • UK before 2004 (until 2006): red line, black neutral; three-phase red/yellow/blue.
  • US: neutral white or gray (NEC 200.6), ground green, green-yellow or bare (250.119); hots black, red (blue for 208Y/120), colours posted at the panel (210.5(C)).

Frequently asked questions

What colour is the live wire in the UK?

Brown since 2004 (red in older installations). Neutral is blue (black in older ones), earth green-and-yellow.

What do the wire colours mean in the US?

Black and red are hot, white or gray is neutral, green or bare copper is ground. A white wire re-marked with tape can be a hot in a switch loop.

Can I trust colours in an old installation?

No. Colours may have been misused or reused: always test with a proper voltage tester after isolating the circuit.

Design aid

For your actual home, move to the editor

Draw your home or describe it to the AI: Circuia places the points, checks the rules in real time and generates the consumer unit, single-line diagram and bill of materials.

Open the free editor

Other free tools