Free tool · No sign-up
Box fill calculator (NEC 314.16)
Count what goes into the box: the calculator applies NEC 314.16(B) — 1 volume per conductor, 2 per device, 1 for all grounds (+¼ beyond four), 1 for clamps — and compares the total with the box volume.
Updated on NEC 2023
Result
Volume needed
16in³
Box volume
14in³
Overfilled: use a larger box, e.g. Device box 3 × 2 × 3-1/2.
NEC 2023 314.16. Local amendments apply; an inspector has the final word.
References
- § NEC 314.16(A)
- § NEC 314.16(B)
- § NEC Table 314.16(A)
- § NEC Table 314.16(B)(1)
Estimate for planning only. Switch off before any work and have it checked by a qualified electrician.
Next step · free
Turn this result into a real plan
Draw your rooms, place sockets and lights: Circuia checks every rule as you go and builds the board schedule.
</> Embed this tool on your website
Free, no sign-up. Paste this code into your page (blog, contractor site, forum): the tool shows up and stays up to date.
How it works
- Volume allowance per conductor from Table 314.16(B)(1): 14 AWG 2.00 in³, 12 AWG 2.25 in³, 10 AWG 2.50 in³.
- Each device yoke counts 2 conductors of the largest size connected to it (314.16(B)(4)).
- All equipment grounding conductors count 1, plus ¼ for each beyond four (314.16(B)(5)).
- Internal clamps count 1 (any number); each fixture stud or hickey counts 1; pigtails inside the box are not counted.
This tool applies US rules (NEC) only.
Frequently asked questions
How many wires in a single-gang box?
Do grounds count in box fill?
What about plastic boxes?
Design aid
For your actual home, move to the editor
Draw your home or describe it to the AI: Circuia places the points, checks the rules in real time and generates the consumer unit, single-line diagram and bill of materials.