Software · Canada

Electrical plan software for Canada: CE Code circuits, panel and materials list

Circuia draws the electrical layout of a house or a suite in your browser: you draw the floor plan, place receptacles, lights and appliances, and the software builds the 120/240 V branch circuits, the panel and the materials list. The Canada pack checks the CE Code 2024, with a Québec variant for chapter V; it is in beta. Permits and inspections stay with the licensed electrician.

Last checked CSA C22.1:24 (CE Code) · beta

Who it is for

From floor plan to panel in 4 steps

  1. 01

    Draw

    Trace the walls on the grid or import an existing plan (image or PDF) as a background. Areas are calculated for you, in metres.

  2. 02

    Place

    Receptacles, counter receptacles, lights, switches, baseboards and appliances: with the mouse, or by asking the AI assistant.

  3. 03

    Wire and check

    Auto-wire builds the branch circuits: 120 V circuits balanced on L1 and L2, 240 V loads on 2-pole breakers, GFCI and AFCI where the code asks for them. The rules run in real time.

  4. 04

    Export

    Floor plan, panel, single-line diagram and materials list go out as a Letter-size PDF to the client, the builder or the inspector (from the Project Pass).

What Circuia does for Canada

What the Canada pack checks

Circuia checks a dwelling plan against the rules explained in the Canadian Electrical Code guide. The table gives an extract, with the values the editor uses. The CE Code mostly sets where receptacles go (no point along a usable wall more than 1.8 m from one) rather than a count per room.

Extract of the editor's checks
TopicReferenceWhat is flagged
Wire and breakerCEC 14-104Breaker too large for the wire (14 AWG over 15 A, 12 AWG over 20 A)
Outlets per circuitCEC 8-304More than 12 outlets on a 15 A circuit
Counter receptaclesCEC 26-722, 26-654Fewer than 2 kitchen counter circuits
GFCICEC 26-704Receptacle near a sink, tub or shower, or outdoors, without Class A GFCI
AFCICEC 26-658Receptacle circuit without combination AFCI
240 V loadsCEC 14-010, 26-744Range, water heater or baseboards on a single-pole breaker
EV chargerCEC 86-300, 8-104EV circuit below 125 % of the charger current
L1 / L2 balancePracticePanel loaded unevenly between the two legs
Service and permitCEC 8-200, provincesReminders: service calculation, permit or notification, inspection

Which CE Code edition applies in your province?

The Canadian Electrical Code, Part I (CSA C22.1) is adopted province by province, often with amendments. Most provinces and territories are on the 2024 edition (26th): Ontario through the Ontario Electrical Safety Code, British Columbia, Alberta, Saskatchewan, Manitoba and the Atlantic provinces.

Québec applies the Code de construction du Québec, chapitre V – Électricité: the 2021 CE Code with Québec amendments, in force since 26 March 2026. Circuia has a Québec variant of the Canada pack for it, chosen per project.

Permits, notifications and who can do the work

In Ontario, work is filed with the ESA (notification) and a homeowner may wire their own home. In British Columbia, Technical Safety BC or the city issues permits, including a homeowner permit for an owner-occupied single-family home. Elsewhere, municipal or provincial permits apply.

In Québec, only a master electrician holding an RBQ licence and member of the CMEQ may do electrical work; the contractor files the déclaration de travaux and requests the connection from Hydro-Québec. Circuia reminds you of these steps in the editor; it files nothing.

Dedicated software or CAD and spreadsheets?

What a software with a Canada pack changes
NeedCAD, spreadsheets, templatesCircuia
Electrical plan symbolsLibraries to assembleBuilt in
CE Code checkBy hand, code book openReal time (beta)
Circuits, GFCI, AFCI, L1 / L2By handProposed automatically
Panel and circuit directoryDrawn separatelyGenerated from the plan
Materials list (NMD90, 5-15R, 14-50R)By handGenerated
Quote baseCopied by handExported (CSV, JSON)

What Circuia does not replace

Free, Project Pass or Pro

Free, Project Pass or Pro
PlanPriceForIncluded
Free$0ExplorePlan editor, real-time CE Code check (beta), automatic circuits and panel, up to 3 active projects
Project Pass$59HomeownersLetter-size PDF export (plan, panel, single-line diagram), materials list, AI assistant (account required)
Pro$75 / monthElectriciansUnlimited projects, PDFs with your business details, materials list as a quote base, AI assistant
All prices →

Further reading

Frequently asked questions

Is Circuia free in Canada?

To start, yes. The Free plan lets you draw, place receptacles and see the CE Code check in real time, for 3 active projects. The Project Pass ($59 plus tax, one-off payment) adds the PDF exports and the materials list. Pro ($75 plus tax per month) is for electrical contractors, with a 14-day free trial.

Does Circuia check the Canadian Electrical Code?

Yes, with a dedicated Canada pack, still in beta. It is built from public sources (provincial regulators, bulletins, the Québec Gazette); we have not read the paid CSA text and no inspector has reviewed the pack yet. It helps you design and catch mistakes; it does not replace a licensed electrician or the inspection.

Can I do my own electrical work in Canada?

It depends on the province. Ontario (ESA notification) and British Columbia (homeowner permit) allow a homeowner to wire their own owner-occupied home with a permit and inspection; other provinces have similar homeowner permits. In Québec only a licensed master electrician may do the work. Check with your provincial authority before starting.

How many kitchen counter circuits does the CE Code require?

At least 2 branch circuits for the counter receptacles, with 15 A split receptacles or 20 A T-slot receptacles, so that no point along the counter wall is more than 900 mm from a receptacle. The fridge usually gets its own circuit. Circuia draws 20 A T-slot circuits with two receptacles each.

Does Circuia handle Québec?

Yes. Choose Québec when you create the project: the Canada pack switches to its Québec variant (chapter V, Hydro-Québec service, déclaration de travaux, EV infrastructure in new homes), and the interface is available in Québec French. This page also exists in French for Québec.

Design aid

Design the installation with this country's rules

Draw the home or describe it to the AI: Circuia places the points, checks the country's rules in real time and generates the consumer unit, single-line diagram and bill of materials.

Open the editor for Canada